18
Frequency Response
±0.5dB from 4Hz to 45,000Hz
(Sampling Frequency - 96kHz and 88.2kHz)
±0.3dB from 4Hz to 22,000Hz
(Sampling Frequency - 48kHz)
±0.3dB from 4Hz to 20,000Hz
(Sampling Frequency - 44.1kHz)
±0.3dB from 4Hz to 15,000Hz
(Sampling Frequency - 32kHz)
Total Harmonic Distortion
0.002% at 1,000Hz
Signal To Noise Ratio
Better than 110dB (A Weighted)
Dynamic Range
Better than 100dB (1,000Hz)
Rated Output Voltage
2V Unbalanced Outputs (BYPASS ON Mode)
6V Unbalanced Outputs (BYPASS OFF Mode)
2V Balanced Outputs (BYPASS ON Mode)
6V Balanced Outputs (BYPASS OFF Mode)
Specifications
Analog Audio Specifications
Digital Audio Specifications
General Specifications
Power Requirements
100 Volts 50/60Hz, 20 watts
110 Volts 50/60Hz, 20 watts
120 Volts 50/60Hz, 20 watts
220 Volts 50/60Hz, 20 watts
230 Volts 50/60Hz, 20 watts
240 Volts 50/60Hz, 20 watts
Note: Refer to the rear panel of the MDA1000 for the correct
voltage.
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 6 inches (15.24cm) including feet
Depth is 16-1/8 inches (40.96cm) including the Front Panel
and Knobs
Weight
24 pounds (
10.89 kg) net, 38 pounds (17.24 kg) in shipping
carton
Digital Audio Format
IEC958, S/PDIF
Coaxial Inputs (1, 2 and 3)
0.5Vp-p @75ohms
Optical Inputs (4, 5 and 6)
-15 ~ -20dBm
XRL Input (7)
5V p-p @110 ohms
Sampling Frequencys
96kHz, 48kHz, 44.1kHz and 32kHz
To Next Page
Loading...
