McIntosh MR85

8
MR85 Rear Panel and RAA1 Top Panel Connections
Connect the MR85 power cord
to a live AC outlet. Refer to
information on the back panel
of the MR85 to determine the
correct voltage
ANTENNA 1
75Ω (ohm) FM
ANT connects to
an external FM
antenna or cable
ANTENNA 1
RAA1 AM ANT
connector for the
supplied McIntosh
Remote AM An-
tenna
TUNER 1 FIXED
OUTPUTS supply
audio signals at a
volume level that
cannot be changed
TUNER 1 OUTPUT
LEVEL control adjusts
the volume level of the
Variable Outputs
POWER CONTROL IN
jack accepts a turn on sig-
nal from a McIntosh Con-
trol Center. The OUT jack
sends the turn on signal to
another McIntosh product
TUNER 1 DATA IN
jack receives tuner
control and operating
data from a McIntosh
Control Center to
control the Tuner 1
Module
TUNER 1 VARIABLE
OUTPUTS supply audio
signals that can be adjusted
by the rear panel TUNER 1
OUTPUT LEVEL control
Spaces reserved for
the optional TM1
second tuner module
TUNER 2 DATA
IN jack reserved
for the optional
TM1 second tuner
module
TUNER 2 FIXED and
VARIABLE OUTPUTS
jacks reserved for the
optional TM1 second
tuner module
TUNER 2 OUTPUT
LEVEL control re-
served for the op-
tional TM1 second
tuner module
EXT TUNER connects to
the MR85 Tuner RAA1
ANTenna 1 Input