MX122 Main Zone - 5.1 thru 7.1 Channel Output Connection Diagram
2B
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
Connect to
AC Outlet
Main Zone Power Amplifier
Powered Subwoofer
(partial view)
From Media Server - Power Control Out
Main Zone - TV/Monitor
Note: Refer to the MX122 Owner’s Manual page 12 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
To Main Zone Power Amplier Two - Power Control In
Note: Refer to Separate Sheet “Mc3A” for 5.1.4 thru
7.1.4 channel additional connections.
To Next Page
Loading...
