3A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com Part No. 04161900
MX122 Main Zone - 5.1.4 thru 7.1.4 Channel Output Connection Diagram
6.6
6.6
Connect to
AC Outlet
Main Zone A - Power Amplifier Three
Main Zone - Power Amplifier Two
Note: Refer to the MX122 Owner’s Manual page 12 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Left and Right Top Front Channels
From Main Zone Powered Subwoofer - Power Control Out
Note: Refer to Separate Sheet “Mc2B” for 5.1. thru 7.1.
channel additional connections.
Left and Right Top Rear Channels
To Next Page
