MX122 Zone 2 Output Connection Diagram
3B
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
Connect to
AC Outlet
Note: Refer to the MX122 Owner’s Manual page 13 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - Network/RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
* 2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
Zone 2 - TV/Monitor
6.6
Zone 2 - Power Amplifier
To Previous Page
Loading...
