MAINTAINING YOUR McLAREN
BATTERY CARE AND MAINTENANCE
166
Boosting procedure
1. If a donor vehicle is to be used, park it so
that the battery location is adjacent, but
ensure the two vehicles do not touch.
2. Apply the parking brake and ensure that the
transmission of both vehicles is set in
neutral (or Park for vehicles with automatic
transmission).
3. Switch off the ignition and all electrical
equipment in both vehicles.
NOTE: Before connecting booster
cables ensure that the battery
connections on the disabled vehicle are
correct and that all electrical equipment has
been switched off.
4. Open the luggage compartment and
remove any items stowed inside.
5. Remove the finisher (1) from around the top
of the luggage compartment liner.
6. Remove the two stowage nets (2).
7. Remove the carpet (3).
8. Remove the 7 screws (4) securing the side
and the base luggage compartment liner.
9. Remove the 10 screws (5) securing the top
edge of the luggage compartment liner.
10. Remove the luggage compartment liner.
To Next Page
Loading...
