2
• The Turbo function ( ) is unavailable for chilled water system and remote
control with SWING MODE ( ) function.
8. OFF timer setting
• Press the OFF TIMER CANCEL button will activate the off timer function.
• Set the desired off time by pressing the OFF TIMER CANCEL button
continuously.
• Press the CANCEL button to cancel the off timer setting.
9. Quiet function (model dependant)
• Press
for quiet operation.
• Fan speed turn to minimum speed.
• Press again to deactivate the function.
• Any change of fan speed will deactivate this function.
• The Silent function (
) is unavailable for chiller water system.
10. Clock time setting
• Press and hold button to set the clock time.
11. ON timer setting
• Press the ON TIMER CANCEL button will activate the on timer function.
• Set the desired on time by pressing the ON TIMER CANCEL button
continuously. If the timer is set to 7.30am, the air conditioner will turn on at
7.30am sharp.
• Press the CANCEL button to cancel the on timer setting.
12. Sleep mode setting
• Press the button will activate the sleep mode function.
• This is an energy saving option. When the
unit is operating under cooling mode, the
set temperature is increased by 0.5°C after
the first half an hour, another 0.5°C after
the second half an hour and 1°C after the
following 1 hour.
• When the unit is operating under heating
mode, the set temperature is decreased by
1°C after the first half an hour, another 1°C
after the second half an hour and 1°C after
the following 1 hour.
• This function is available under COOL, HEAT and AUTO mode.
13. Temperature setting
• To set the desired room temperature, press the or button to increase or
decrease the set temperature.
• The temperature setting range is from 16°C to 30°C (Optional setting 20°C
to 30°C).
• Press both buttons and simultaneously to toggle from °C to °F setting.
+2 C
+1 C
- 1 C
- 2 C
0 0.5 1 1.5 2
- 3 C
1 OM-GS01-1209(0)-McQuay 1/14/10, 4:37 PM2
To Next Page
Loading...
Need help?
General
