15
12. Status Indicator Light (Led 0 or 1)
0 = Status indicator never on
1 = Status indicator on with rst stage
Press the up or down button to select.
Press the CONFIG button for 2 seconds to exit conguration.
OFF
11. Cooling Fan Delay Off Time (0, 30, 60, 90 seconds)
Select the fan purge time for cooling.
Press the up or down button to select.
Press the right button to advance to the next screen.
Note: The McQuay control board provides a minimum Fan Off delay of 30
seconds, even if the thermostat is set for a 0 second delay.
To Next Page
Loading...
