18
PROG
PROG
PROG
Cool and Heat Mode (Auto Changeover)
• In this mode, the thermostat controls the cooling and heating systems, automatically
changing over from one to the other as needed.
• The timing display alternates with the set temperature every 10 seconds in the cool
and heat mode.
Program Mode
• In this mode, the program function is on (PROG displays), and the thermostat
will automatically be controlled by the set program schedule. Program mode can
function with heat mode, cool mode, or heat & cool mode. The program schedule
can be overridden by changing the set temperature (up or down button). After 2
hours, the program schedule will automatically be resumed. To manually return to
the program schedule, press the PROG button twice.
To Next Page
Loading...
