Need help?Do you have a question about the McQuay MCW600 and is the answer not in the manual?
Fan wheel design reduces noise by allowing lower fan RPM for specified airflow.
Water connection side and fan-motor assembly can be field-changed for varied installations.
Slit fin design minimizes boundary layer air for improved heat exchange efficiency.
Units offer four external static pressure options: 0Pa, 30Pa, 60Pa, and 80Pa.
Unit height of 251mm suits most ceiling installations and allows for drain fall requirements.
Details on PTC heater safety, energy saving, and ease of installation and maintenance.
Inspect shipments upon delivery for damage or loss and follow claim procedures.
Ensure sufficient space for installation, maintenance, piping, wiring, and support.
Install unit for concealed ceiling mounting, ensuring it is level and properly supported.
Insulate chilled water pipes, air ducts, and use appropriate adhesive for insulation.
Connect air ducts using suitable galvanized steel, ensuring no leaks and fireproof material.
Connect water pipes with suitable fittings, noting inlet/outlet orientation and drainpipe slope.
Connect wiring per diagram, ensure grounding, use strain relief, and comply with regulations.
To Next Page
General
