Need help?Do you have a question about the McQuay MCW1000 and is the answer not in the manual?
Enlarged fan wheels reduce noise by allowing lower fan RPM selection.
Water connection side and air/return plenum can be easily changed in the field.
Slit fin design improves heat exchange efficiency by eliminating boundary air layer.
Four types of external static pressure available: 0Pa, 30Pa, 60Pa, 80Pa.
Unit height is 251mm, suitable for concealed installations and drain fall requirements.
Uses PTC heater for heating, with safety features like fuse and thermostat.
Provides key performance and physical specifications for various MCW models.
Factors to adjust total and sensible cooling capacity for medium and low fan speeds.
Factors to adjust heating capacity for medium and low fan speeds.
Instructions for inspecting shipments upon delivery for damage or loss.
Guidelines for selecting an appropriate installation site, considering space and support.
Steps for mounting the unit, ensuring it is level and properly supported.
Requirements for insulating chilled water pipes, air ducts, and unit parts.
Overview of the factory-assembled, horizontal, blow-thru type fan coil unit.
Details factory testing for leakage and component functionality before packing.
Describes the construction and materials of the casing, coil, fan, motor, drain pan, and filter.
To Next Page
General
