OM WGS-5 WGS 130A to 190A 53
11. For recommendations and answers to system questions, contact the McQuay
Applications Group in Staunton, Virginia.
Building Automation System (BAS) interface and monitoring is an optional accessory
required for many systems. The WGS-A interface options are communication cards
supporting L
ONWORKS, BACnet or Modbus. Refer to the other McQuay brochures listed in
this manual for a complete description of capabilities. As a general statement, the McQuay
communication cards do NOT support the evaporative condenser. The desired interface
points for the condenser must be provided by others and through the control system
provided with the evaporative condenser. Use caution in the ability to change condenser
setpoints through the BAS system as such changes can impact chiller operation.
To Next Page
Loading...
Need help?
General
