MCS MCS16 - Installation; Mounting; Wiring; Power Inputs (CON2)

4 x M4 holes are supplied for
mounting the unit to a base panel.
2.2) Wiring
Power In and Outputs
2.3) Power Inputs (CON2)
Pin Name Function
1 Bank B
Power Supply to B
2 Ignition Sense
Power supply to Output 16, and input voltage sense for primary battery.
3 Ground
System Ground
4 Bank A
Power Supply to A
2.4) Power Outputs
(CON1 & CON3)
Pin Name Connector
7-9 Power Outputs 1
7-10 Power Outputs 3
6 Power Output 1
2.5) Configurable Outputs
(CON1 & CON3)
Pin Name Connector
1-4 Low Power
Outputs
1
2-5 Low Power
Outputs
3
2.6)
Auxiliary I/O’s (CON1 & CON3)
Pin Name
Connector
5 Pin 10 Bypass Diode 1
10 Output from Bypass
Diodes
1
9 Pin 10 Bypass
Diode/Output 1
1
1 Pin 6 Bypass Diode 3
6 Output from Bypass
Diodes
3
7 Pin 6 Bypass
Diode/Output 8
3
MCS16 Installation Guide 1V1
mounting the unit to a base panel.
Power Supply to B
-Bank Outputs
Power supply to Output 16, and input voltage sense for primary battery.
System Ground
\ Chassis
Power Supply to A
-Bank Outputs and the Siren.
(CON1 & CON3)
Connector
Supply Polarity switching
Current Max / Output
Bank A Positive output
Bank B Positive output
Primary Positive output
(CON1 & CON3)
Function
Current Max / Output
Configurable Positive or Negative
Data Outputs
Positive Only Data Outputs
0.6 A continuous (1 A
peak) current per switch
Auxiliary I/O’s (CON1 & CON3)
Connector
Function Supply
Primary
MCS16 Installation Guide 1V1
Page 4 of 8
Power supply to Output 16, and input voltage sense for primary battery.
Current Max / Output
20 Amps
20 Amps
20 Amps
Current Max / Output
5A
0.6 A continuous (1 A
peak) current per switch