MCS MCS16 - Siren Speaker Connector; System Connector; Inputs; CAN Bus

MCS16 Installation Guide 1V1
Page 5 of 8
2.7) Siren Speaker Connector
Pin Name
1 11 Ohm Speaker
2 11 Ohm Speaker
3 8 Ohm Speaker
4 8 Ohm Speaker
Inputs and Peripherals
2.8) System Connector
Pin Name Function
1 Reset Connect to 12V to reset the MCS32
2 Standby When connected to chassis \ ground, this input places the MCS32 into a
very low power mode. All functionality is suspended.
2.9) Inputs
Pin Name Function
9-16 Negative Inputs User Defined
1-8 Positive Inputs User Defined
2.10) CAN Bus
Pin Name Function
1 Remote Power
Out
12V Output for CAN Remotes. Protected with a 500mA resettable fuse.
2 CAN 1 High Use CAN1 with MCS System Handsets and Expansion Modules
3 CAN 1 Low
4 Ground
5 CAN 2 High Use CAN2 with Vehicle CAN Only.
6 CAN 2 Low