PowerBook G4 (FireWire 800) 15-inch 27
Step 22: Remove the hard drive
by carefully prying it up from
the right side and lifting it out.
Step 23: Remove the logic
board cable, plastic shield, rub-
ber grommets, and side screws
from the original internal hard
drive and place them onto the
new hard drive.
Step 24: Install the new hard
drive into the PowerBook.
Step 25: Reverse the preceding
steps to install your new internal
hard drive.
Congratulations on the installation of your new PowerBook hard drive
upgrade!
Note: It is normal for usable hard drive capacities to be reduced
by 5-7% upon initialization of the drive. Also, your drive ships
preformatted and initialized, but does not include system software
on it. If you have the appropriate hardware, such as the MCE
Transport Pro FireWire/USB Hard Drive Kit, you may transfer the
data from the original internal hard drive to the new internal hard
drive. If not, you may need to re-install your system software and
other applications from the original disks or CD/DVD disc. Consult
the manual(s) that came with your PowerBook for details.
To Next Page
Loading...
General