EasyManua.ls Logo

MD 5008 User Manual

MD 5008
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MAIN TECH PARAMETER CARE AND MAINTENANCE
MAIN TECH PARAMETER
z Emitting Frequency
6.99KHz
z Signal Frequency
437KHz
z Weight
2.875KG
z Power Supply
8pcs 1.5V Batteries
Attach external
battery box and bag.
z Max Detection
Small coil: 1.5meters
Big coil: 3.0-3.5meters
This conclusioin is elicited by
testing an aluminum sheet
(60cm*60cm*1cm) buried in
dry soil
z Sensitivity
Small coil: 25-30cm (test 25 US
cent)
Big coil: 35-40cm (test 25 US
cent)
z If the detector doesn’t work
properly, it is possible that the
batteries haven’t enough power,
replace batteries to try ;
z Place batteries matching the
polarity symbols (+ and ) If
you won’t use it for a long time,
take out the batteries to avoid
putridness;
z The search coil’s plug should be
not affected with damp, or the
detector will loss detection
ability; the plug can be used
only after drying in such
condition;
z The detector is prohibited to
work in rainy day and in
burning sun;
z The search coil should be far
away from furnace and other
high temperature circumstance;
z Each detector is attached a
piece of guarantee and it is free
to be repaired during the length
of warrantee unless he circuit is
changed by user himself.
OWENER’S MANUAL MD-5008
Please read before using this equipment
Metal Detector
5008
15
Question and Answer IconNeed help?

Do you have a question about the MD 5008 and is the answer not in the manual?

MD 5008 Specifications

General IconGeneral
BrandMD
Model5008
CategoryMetal Detector
LanguageEnglish

Summary

MAIN TECH PARAMETER

CARE AND MAINTENANCE

FEATURES

OUTDOOR TESTING AND USE

INDOOR TESTING AND USE

PREPARATION

GROUND BALANCE MODE

Explanation and procedure for setting the detector to Ground Balance mode.

DISCRIMINATION MODE

Explanation and procedure for setting the detector to Discrimination mode.

OPERATION MODE SWITCH (MODE)

GROUND BALANCE

Details on using the Ground Balance mode for detection.

ACTUAL OPERATION

INSTALLING BATTERIES

Instructions for correctly inserting the required 1.5V batteries.

TESTING THE BATTERIS

Ground Balance Detailed Procedure

INTRODUCTION OF OPERATION BUTTON