What to do if my Meade TE388W Weather Station cannot locate the remote sensor?
If your Meade Weather Station is unable to locate the remote sensor, try the following: First, check the batteries in the remote sensor. Second, verify the location of the remote sensor. Finally, press and hold the DOWN button on the main unit to initiate a search for the signal from the remote sensor.
How to fix Meade TE388W when US Atomic Time signal is not received?
If your Meade Weather Station is not receiving the US Atomic Time signal, place the unit by a window and leave it there overnight.
What to do if data on Meade TE388W Weather Station sensor does not match data on the main unit?
If the data on your Meade Weather Station sensor does not match the data on the main unit, initiate a manual sensor search by pressing and holding the DOWN button on the main unit.
General| Brand | Meade |
|---|---|
| Model | TE388W |
| Category | Weather Station |
| Language | English |
Steps and recommendations before starting the installation process.
Details on wireless transmission range and sensor placement.
Key features of the TS03C remote sensor unit.
Identification and function of the remote sensor's parts (LED, battery, reset).
Instructions for installing batteries in the remote sensor and main unit.
Guidance on securely mounting and optimally placing the remote sensor.
Steps to follow immediately after installing batteries and sensors.
Details on precise timekeeping, alarms, and calendar display.
Information on weather forecast icons and temperature monitoring.
Understanding the weather forecast icons and their accuracy.
How the unit displays temperature from remote sensors.
Interpreting sensor connection status and manually searching for signals.
Selecting indoor/outdoor temperature display and viewing remote sensor data.
Programming temperature units, setting temperature alarms, and activation.
Recalling and clearing minimum/maximum temperature readings.
Understanding atomic time reception and signal strength.
Selecting the correct US time zone for the atomic clock.
Setting year, month, day, time format, and weekday language.
Setting weekday and single day alarms for the main unit.
Programming the ice warning alarm based on temperature thresholds.
Methods to enable or disable configured alarms.
Guidelines for changing batteries and cleaning the main unit and sensors.
Guidance on resolving common problems with the main unit and remote sensor.
Important safety and handling precautions for the device.
Technical details for the main unit's temperature, clock, and features.
Technical details for the remote sensor's temperature range and RF transmission.
Information on battery requirements and unit dimensions.
Device compliance with FCC rules regarding interference.
Guidelines for safe battery usage and handling.
To Next Page
