Mean Well HDR-15 Series User Manual

Installation Manual
 Type：HDR DIN rail power supply（Series：HDR-15, HDR-30, HDR-60, HDR-100, HDR-150）
HDR-15-5 INPUT: 100-240VAC 0.5A 50/60Hz OUTPUT: 5V 2.4A
HDR-15-12 INPUT: 100-240VAC 0.5A 50/60Hz OUTPUT: 12V 1.25A
HDR-15-15 INPUT: 100-240VAC 0.5A 50/60Hz OUTPUT: 15V 1.0A
HDR-15-24 INPUT: 100-240VAC 0.5A 50/60Hz OUTPUT: 24V 0.63A
HDR-15-48 INPUT: 100-240VAC 0.5A 50/60Hz OUTPUT: 48V 0.32A
HDR-30-5 INPUT: 100-240VAC 0.88A 50/60Hz OUTPUT: 5V 3.0A
HDR-30-12 INPUT: 100-240VAC 0.88A 50/60Hz OUTPUT: 12V 2.0A
HDR-30-15 INPUT: 100-240VAC 0.88A 50/60Hz OUTPUT: 15V 2.0A
HDR-30-24 INPUT: 100-240VAC 0.88A 50/60Hz OUTPUT: 24V 1.5A
HDR-30-48 INPUT: 100-240VAC 0.88A 50/60Hz OUTPUT: 48V 0.75A
HDR-60-5 INPUT: 100-240VAC 1.8A 50/60Hz OUTPUT: 5V 6.5A
HDR-60-12 INPUT: 100-240VAC 1.8A 50/60Hz OUTPUT: 12V 4.5A
HDR-60-15 INPUT: 100-240VAC 1.8A 50/60Hz OUTPUT: 15V 4.0A
HDR-60-24 INPUT: 100-240VAC 1.8A 50/60Hz OUTPUT: 24V 2.5A
HDR-60-48 INPUT: 100-240VAC 1.8A 50/60Hz OUTPUT: 48V 1.25A
HDR-100-12 INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 12V 7.1A
HDR-100-15 INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 15V 6.13A
HDR-100-24 INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 24V 3.83A
HDR-100-48 INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 48V 1.92A
HDR-100-12N INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 12V 7.5A
HDR-100-15N INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 15V 6.5A
HDR-100-24N INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 24V 4.2A
HDR-100-48N INPUT: 100-240VAC 3.0A 50/60Hz OUTPUT: 48V 2.1A
HDR-150-12 INPUT: 100-120VAC 3.0A 50/60Hz OUTPUT: 12V 10.2A
INPUT: 200-240VAC 1.8A 50/60Hz OUTPUT: 12V 11.3A
HDR-150-15 INPUT: 100-120VAC 3.0A 50/60Hz OUTPUT: 15V 8.55A
INPUT: 200-240VAC 1.8A 50/60Hz OUTPUT: 15V 9.5A
HDR-150-24 INPUT: 100-120VAC 3.0A 50/60Hz OUTPUT: 24V 5.31A
INPUT: 200-240VAC 1.8A 50/60Hz OUTPUT: 24V 6.25A
HDR-150-48 INPUT: 100-120VAC 3.0A 50/60Hz OUTPUT: 48V 2.72A
INPUT: 200-240VAC 1.8A 50/60Hz OUTPUT: 48V 3.2A
 Introduction
HDR is a DIN rail power supply series with ultra slim appearance and full range AC input (100-240Vac). The series
conforms to EN6100-3-2, the norm the European Union regulates for harmonic current. With plastic housing, it can
effectively prevent user from electric hazards. Like other Mean Well’s DIN series, they can be mounted on a TS35
Standard DIN rail.
 Installation
（1） Always allow good ventilation clearances, 5mm left and right, 40mm above and 20mm below, around the
unit in use to prevent it from overheating. Also a 10-15 cm clearance must be kept when the adjacent device
is a heat source.

Mean Well HDR-15 Series Specifications

General

Output Power	15W
Output Voltage	5V, 12V, 15V, 24V, 48V
Operating Temperature	-30°C to +70°C
DC Adjustment Range	±10%
Withstand Voltage	I/P-O/P: 3kVAC, I/P-FG: 2kVAC, O/P-FG: 0.5kVAC
Input Voltage	85 ~ 264VAC
AC Input Voltage Range	85 ~ 264VAC
Safety Standards	EAC TP TC 004
EMC Standards	EN55032
Connection	Terminal block
Protections	Overload, Over Voltage
Cooling	Natural air convection
Over Voltage Protection	115% ~ 135% rated output voltage