EasyManua.ls Logo

Mean Well RSP-750 Series - User Manual

Mean Well RSP-750 Series
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Manual
TypeEnclosed Type Switching Power Supply
(Fami l i es: CS P, E N P, G 3 , G 5, HEP, HSP, L RS , M S P, N E , NES , P F C, PSP, P S PA , RS, RS P,
RST, SE, SPV, UHP, USP)
Introduction
Enclosed type switching power supplies possess a metal or plastic case for covering their internal PCB and will be
installed inside the case of the end system. Mean Well’s enclosed type power supplies include 2 different groups of
power supplies, with built-in fan and without built-in fan, depending on their rated power or design concept.
Installation
1Before any installation or maintenance work, please disconnect your system from the utility.
Ensure that it can’t be re-connected inadvertently!
2Keep enough insulation distance between mounting screws and internal components of power supplies. Please
refer to case drawing on specifications to receive the maximum length of mounting screw.
3Mounting orientations other than standard orientation or operate under high ambient temperature may
increase the internal component temperature and will require a de-rating in output current. Please refer to
the specification sheets to receive the optimum mounting position and information about the de-rating curve.
4Fans and ventilation holes must be kept free from any obstructions. Also a 10-15 cm clearance must be kept
when the adjacent device is a heat source.
5Input and Output terminal
Terminal Screw
Series
Screw Size
Suggested
Torque
RSP-750 / 1000 / 1500 / 2000 / 2400 / 3000
SE-450 / 1000 / 1500
HEP-600HRP-300HRPG-300MSP-300
SP-480SP-750SPV-1500USP-500RST-10000
M4 10-12kgf-cm
HRP-075 / 100 / 150 / 200HRPG-150 / 200
LRS-035 / 050 / 075 / 100 / 150 / 150F / 200 / 350
MSP-100 / 200
NED-035 / 050 / 075 / 100NET-035 / 050 / 075
NES-025 / 035 / 050 / 075 / 100 / 150 / 200 / 350
QP-200 / 320 / 375
RD-050 / 065 / 085 / 125RID-050 / 065 / 085 / 125
RS-035 / 050 / 075 / 100 / 150
RSP-075 / 100 / 150 / 200 / 320
SP-075 / 100 / 150 / 200 / 240 / 320SPV-150/300
SE-100 / 200 / 350HSP-250PSP-600
M3.5 8-10 kgf-cm
RSP-1600
RD-035RT-050 / 065 / 085 / 125
RQ-050 / 065 / 085 / 125
TP-075 / 100 / 150QP-100 / 150
RS-015 / 025
NES-015USP-150
M3 6-8 kgf-cm
ERP-350
HDP-190 / 240
NEL-200 / 300
#6 8-10 kgf-cm
ENP-120 / 180 / 240 / 360 M2.6 4-5 kgf-cm
Question and Answer IconNeed help?

Do you have a question about the Mean Well RSP-750 Series and is the answer not in the manual?

Summary

Introduction

Installation

Input and Output Terminal

Details terminal screw types, sizes, and suggested torque values for various power supply series.

Torque Specifications

Recommended Torque for Iron

Provides recommended torque values for iron screws based on imperial and metric sizes.

Wire and Wiring Guidelines

Recommended Wires

Specifies wire gauges (AWG) and cross-sections based on rated current for equipment.

Wiring Color Codes

Details wire color conventions for Live/ACL, Neutral/ACN, and PE/FG in North America and Europe.

Warnings and Cautions

Electrical Safety and Handling

Emphasizes electrical shock hazards, self-repair prohibition, and grounding requirements.

Environmental Installation Guidelines

Advises against installation in humid, high-temperature, or near-fire-source locations.

Performance and Operational Limits

Stresses adhering to rated output current and wattage specifications for safe operation.

EMC and Regulatory Compliance

Covers EMC regulations, FCC compliance, and BSMI approvals for specific product series.

Mean Well RSP-750 Series Specifications

General IconGeneral
BrandMean Well
ModelRSP-750 Series
CategoryPower Supply
LanguageEnglish

Related product manuals