Mec AUTO-MATE - Auto-Mate Fuse Replacement

800-797-4632 . mecoutdoors.com
15
MEC AUTO-MATE ASSEMBLY MANUAL
AUTO-MATE FUSE REPLACEMENT
Step 1:
Remove the power cord.
Step 2:
Expose fuse. Take a small standard
screwdriver and push in while turning counter
clockwise.
Step 3:
Remove fuse from fuse holder and replace
with a fuse that matches factory specications.
Fuse Glass 2A 250VAC 3AB 3AG
NOTE: Lesser quality fuses may blow at
lower than rated value. If you can not
locate fuses that meet these specs, contact
MEC Outdoors for replacement fuses.
19
Fuse Replacement
STEP 2
TO EXPOSE FUSE.
WITH A SMALL STANDARD SCREW
DRIVER PUSH IN WHILE TURNING
COUNTER CLOCKWISE.
STEP 1
REMOVE POWER CORD!
STEP 3
REMOVE FUSE FROM FUSE HOLDER
AND REPLACE WITH A FUSE THAT
MATCHES FACTORY
SPECIFICATIONS. ( SEE BELOW)
3AG – 250V AMP FAST ACTING
NOTE: LESSER QUALITY FUSES MAY
BLOW AT LOWER THAN RATED
VALUE. IF YOU CAN NOT LOCATE
FUSES THAT MEET THESE SPECS,
CONTACT MEC FOR REPLACEMENT
FUSES.
1
19
Fuse Replacement
STEP 2
TO EXPOSE FUSE.
WITH A SMALL STANDARD SCREW
DRIVER PUSH IN WHILE TURNING
COUNTER CLOCKWISE.
STEP 1
REMOVE POWER CORD!
STEP 3
REMOVE FUSE FROM FUSE HOLDER
AND REPLACE WITH A FUSE THAT
MATCHES FACTORY
SPECIFICATIONS. ( SEE BELOW)
3AG – 250V AMP FAST ACTING
NOTE: LESSER QUALITY FUSES MAY
BLOW AT LOWER THAN RATED
VALUE. IF YOU CAN NOT LOCATE
FUSES THAT MEET THESE SPECS,
CONTACT MEC FOR REPLACEMENT
FUSES.
1