8) Dry Press this button to choose Dry mode
9) Fan Press this button to choose Fan mode.
10)
Vary from Celsius degree to Fahrenheit degree.
11) Power Press this button to turn on/off the unit.
Water Drainage
1. Manual drain: (as shown in Figure 10)
1). Once the unit shuts down upon full water, turn off the power of the unit and then unplug
the power plug.
Note: move the unit carefully to avoid spillage of water in the water tray at the bottom
of the unit.
2). Put the vessel that holds water below the water outlet at the back of the unit.
3). Screw off the drain cap, unplug the water plug and water will flow into the vessel that
holds water automatically.
Note: 1. Protect the drain cap and water plug properly.
2. Tilt the unit slightly backward when draining.
Page:10/16
To Next Page
Loading...
Need help?
General
