What to do if MED-EL Hearing Aid audio processor flashing indicator light indicating batteries empty?
If the MED-EL Hearing Aid audio processor's indicator light is flashing, which indicates that the batteries are empty, turn the processor off, replace the batteries, and then turn it back on. Note that if the processor isn't switched off, the indicator light will continue to blink.
What to do if MED-EL Hearing Aid audio processor flashing indicator light indicating electronic problem?
If the MED-EL Hearing Aid audio processor's indicator light is flashing, signalling an electronic problem or temporary processor disturbance, try switching the processor off and then back on. If the blinking continues, the audio processor should be replaced.
Why MED-EL SONNET (Me1310) Hearing Aid audio processor flashing indicator light indicating programming failure?
If the MED-EL Hearing Aid audio processor's indicator light is flashing, indicating that the selected position is not programmed or there is a programming failure, try selecting another position. If the blinking continues, the processor should be reprogrammed by the clinic.
How to return to microphone signal source input with MED-EL Hearing Aid FineTuner?
To return to the M (microphone) signal source input with the MED-EL Hearing Aid FineTuner, switch the audio processor off and on again.
How to fix red indicator light on MED-EL SONNET (Me1310) Speech Processor Test Device?
To resolve the issue of the red indicator light not lighting up or staying on constantly during use of the MED-EL Speech Processor Test Device, try the following: adjust the volume setting, change the batteries, or replace the existing coil cable with a substitute cable.
Why MED-EL SONNET (Me1310) Hearing Aid audio processor does not respond to FineTuner commands?
If your MED-EL Hearing Aid audio processor isn't responding to FineTuner commands, first, ensure the FineTuner is within operational range by moving it closer to the audio processor. Also, check if the FineTuner keyboard lock is active and unlock it following the instructions. Interference from other electronic devices could be the reason, so try moving closer or relocating. If these steps don't work, remove the battery and re-insert it after a few minutes. Also, ensure that the FineTuner battery is not low by replacing it. If the problem persists, the desired command or indicator light may have been disabled by your audiologist during fitting. In this case, contact your clinic, CI centre or MED-EL to enable the command or the indicator light. If the audio processor and the FineTuner are n...
Details the primary applications and purpose of the SONNET audio processor.
Specifies the conditions and patient types for whom the SONNET is indicated.
Outlines situations or conditions where the SONNET should not be used.
Describes the external components that make up the SONNET audio processor.
Explains the combined electric-acoustic stimulation technology used in SONNETeas.
Details how to turn the SONNET audio processor on and off using the battery pack cover.
Introduces the FineTuner as a device for controlling the audio processor.
Information regarding the battery pack, its components, and attachment.
Description of the coil, its function, and magnet strength adjustments.
Details on the coil cable, its purpose, and replacement instructions.
Explanation of different earhook types and their attachment to the processor.
Information on the microphone cover's function, replacement, and personalization.
Instructions for connecting external audio devices to the SONNET processor.
Covers essential safety guidelines for the overall cochlear implant system.
Safety advice related to common technologies like metal detectors, phones, and travel.
Information on safety considerations during medical treatments and examinations.
Guidelines and precautions for undergoing MRI scans with the implant.
Addresses safety concerns related to dental treatments, ear infections, and vaccinations.
Basic instructions for cleaning and maintaining the SONNET audio processor.
Routine weekly cleaning and drying procedures for the audio processor.
Details on battery type, replacement, and important safety warnings.
Step-by-step guide on how to replace the batteries in the SONNET audio processor.
Instructions for replacing the battery in the FineTuner accessory.
How to use the test device to diagnose common audio processor issues.
Common issues with the FineTuner and potential solutions.
Explanation of different indicator light patterns and their causes.
Description of private alert signals for battery status, range, and confirmation.
Details on the meaning of indicator lights on the FineTuner.
Detailed technical specifications for the SONNET audio processor.
Specific features unique to the SONNETeas model.
Technical details and specifications for the FineTuner accessory.
Explanation of symbols used in the manual and on the device.
Declarations regarding electromagnetic compatibility and emissions.
Information on product warranty, guarantee terms, and registration process.
Contact details for the worldwide headquarters of MED-EL.
General| Processor Model | SONNET |
|---|---|
| Manufacturer | MED-EL |
| Product Code | ME1310 |
| Water Resistance | IP54 |
| Channels | up to 12 |
| Type | BTE (Behind-the-Ear) |
| Battery Type | 2 x Size 675 zinc-air batteries or rechargeable battery pack |
| Connectivity | Bluetooth |
| Microphones | Dual microphones |
| Sound Coding Strategies | FS4 |
| Colors | Various colors available |
To Next Page
