Medel MP7 Quick - Directions for Use and Measurement Advice; Correct Measurement Techniques

7. DIRECTIONS FOR USE
IMPORTANT: Prior to every measurement, fit a new undamaged
probe cover on the measuring probe. Failure to do so or use of
a dirty, damaged or unfitted probe cover may result in incorrect
temperature measurement.
1. Press the O/I button. The LCD is activated
to show all segments for 2 seconds.
2. The last measurement reading will be
shown on the display automatically
for two seconds with the „M“ icon.
3. When the °C or °F icon is flashing,
a beep sound is heard and the thermometer
is ready for the measurement.
4. Straighten the ear
canal by pulling the
ear up and back to
give a clear view of
the eardrum (Pic.8,9).
• For children under
1 year:
- Pull the ear
straight back
• Children aged
1 year to adult:
- Pull the ear up and
back (Pic.7).
5. While tugging the ear,
insert the probe snugly
into the ear canal and
press the "START” but-
ton. Release it, when
you hear a beep
sound. This is the
reminding signal that comfirms the end of measurement.
6. Remove the thermometer from the ear canal. The LCD displays
23
Pic. 7
Pic. 8
Pic. 9