EasyManua.ls Logo

Medel MP7 Quick - Measurement Advice for Accuracy; Changing Temperature Units

Medel MP7 Quick
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
the measured temperature.
IMPORTANT: 10 short beeps will sound when the temperature is
higher than 37.5°C in order to alert the patient that he/she may
have fever.
7. Replace the probe cover after each measurement. To do this,
please follow the instruction in point 6 „HOW TO RELOAD A
NEW AND CLEAN PROBE COVER?“.
8. In order to assure the accurate readings, please wait at least 30
seconds after 3-5 continuous measurements.
ADVICES FOR A CORRECT MEASUREMENT
• For an infant, it is best to have the child laying flat with his head
sideways so the ear is facing upwards. For an older child or
adult, it is best to stand behind and slightly to the side of the
patient.
• Always take the temperature in the same ear, since the temperatu-
re readings may be different from the right ear and left ear.
• Please wait for a few minutes to take the ear temperature after
sleeping.
• Take three temperatures in the same ear and consider the highest
one taken as the reading.
8. CHANGING FROM FAHRENHEIT TO CELSIUS AND VICE-VERSA
The MEDEL MP7 QUICK instant infrared thermometer can display
temperature measurements in either Fahrenheit or Celsius. To
switch the display between °C and °F, simply turn OFF the unit ,
press and hold the Start button for 5 seconds. When you stop
pressing the Start button after 5 seconds, the current measurement
scale (°C or °F icon) will be flashed on the display. Toggle the
measurement scale between °C and °F by pressing the start
button again. When the measurement scale has been chosen,
wait for 5 seconds and the unit will enter the ready for measuring
mode automatically.
24