Technical Data | 9
Batteries: 2 pcs 1,5 V AA
Accuracy: Quarzstability, <100 ppm
Signal: Buzzing signal after 1, 5 and 10 minutes
Display: 4-digit Liquid crystal display (LCD)
Operation: 2 foil buttons
Measurements: 160 x 100 x 35 mm (H x W x D)
Weight: 250 g (including batteries)
Operating conditions
Temperature limitation: + 5 °C to + 40 °C
Pressure limitation: 70 kPa – 106 kPa
Humidity limitation: 30 – 75%
Transport/Storage conditions
Temperature limitation: – 20 °C to + 50 °C
Pressure limitation: 70 kPa – 106 kPa
Humidity limitation: 20 – 95%
The Apgar Timer fulfils standard IEC 60601-1-2 where electromag-
netic compatibility is concerned. While the Apgar Timer is in use,
other equipment which also fulfils this standard will not be affect-
ed nor will the other equipment affect the operation of the Apgar
Timer.
9 Technical Data
To Next Page
Loading...
