9EN
Prior to first • Disassemble, wash and rinse all parts of your pump kit that
use and come in contact with the breast and milk (a+b+c+d+j+k+l).
once daily • Place parts in a saucepan of sufficient capacity.
• Fill with cold water until the parts are well covered. Optionally,
a tea spoon of citric acid may be added to avoid a build-up of
limescale.
• Heat it up and allow to boil for 5 minutes.
• Remove from stove and drain water off.
• Dry parts with a clean towel.
Alternatively, the disassembled parts can be sanitized in top
rack of dishwasher or steam-sterilized.
Note: Food colorings may discolor components which will not
affect performance.
After each • Disassemble and handwash all parts of your pump kit that
use come in contact with the breast and milk (a+b+c+d+j+k+l) in
warm, soapy water.
• Rinse in clear water.
• Dry parts with a clean towel.
Hints After cleaning, when parts are not in use, put in a clean zip lock
bag or store in a container with lid. Alternatively, the parts can
be wrapped in a clean paper or cloth towel.
Hygiene • Wash hands thoroughly with soap and water before touching
the breast and pump parts.
• Avoid touching the inside of bottles and lids.
• Clean the breast and surrounding area with a damp cloth.
• Do not use soap or alcohol which can dry the skin and cause
cracked nipples.
To Next Page
Loading...
