Record
Start Recording
Play back the Recording
Press the [RECORD] button, the four-beat on
the LCD
indicator
will flash simultaneity, indicating the “record
waiting
status”.
A voice and style can be selected in this status.
The ACCOMP track and MELODY track can be recorded
together.
Status”, play the keyboard (the chord area when
recording ACCOMP) or press [START/STOP] button;
it will start recording and the beat will be displayed
according to the current tempo.
STOP AUTOMATICALLY
While recording, once the capability is full, the recording
will be stopped automatically. “FULL” will be displayed
on the LCD.
1.
1.
2.
2.
Press and hold down [REC] button 2 seconds to play back
the recorded data.
Press [REC] button again (or press [START/STOP]
button)
could quit playback.
STOP MANUALLY
Press [RECORD] button again to stop the recording
immediately.
When a style is playing, press the [INTRO/ENDING]
button, it will stop recording automatically after “ending”.
NOTE:
Once the recording of one track is started, the original
data in the track will be overwritten.
In “Record Status”, song mode will be invalid.
It means, you could not switch to the Song Mode by
pressing [STYLE/ SONG/VOICE] button.
NOTE:
If you power off the keyboard, the recorded data would
be erased.
When the capability is empty, “NULL” will be displayed
on the LCD, and then quit playback state automatically.
Flash simultaneously
PLAY
STYLE
SONG
START /
STOP
SYNC
INTRO /
ENDING
FILL
A.B.C.
TOUCH
DUAL
LOWER
DSP
SUSTAIN
STYLE
SONG
START /
STOP
SYNC
INTRO /
ENDING
FILL
PLAY
16
When all the settings have been done in “Record Waiting
Stop Recording
To Next Page
Loading...
Need help?
General
