Medeli M5 User Manual

Function Menu
Touch
MIDI IN
MIDI OUT
RECEIVE can be used to set the channel of MIDI IN.
Channel 1-16 can be selected by pressing [+/YES] /
[-/NO] button.
The default setting is ALL.
TRANSMIT can be used to set the channel of MIDI OUT.
Channel 1-16 can be selected by pressing [+/YES] /
[-/NO] button.
The default setting is 001.
FUNCTION
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
0
NO
YES
FUNCTION
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
0
NO
YES
Press [FUNCTION] button to enter the REVERB LEVEL
sub-menu.The LCD displays the current reverb level.
Use [+/YES] / [-/NO] button to adjust the level from 0 to
127, the default level is 045.
Tune
Press [FUNCTION] button to enter the TUNE sub-menu.
The LCD displays the current tune value.
Use [+/YES] / [-/NO] button to adjust the tune value from
-50 to 50 (stand for -100 to 100 cents)
The default setting is 000.
NOTE:
This setting will be effective to both voice and style.
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
0
NO
YES
Press [FUNCTION] button to enter the TOUCH sub-menu.
The LCD displays the current touch level.
Use [+/YES] / [-/NO] button to select touch level from off
to level 3. if the value is set as OFF, that means no touch
response to keyboard, and LCD darkens”TOUCH”flag.
Default level of touch response is 002.
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
0
NO
YES
0
NO
YES
FUNCTION
FUNCTION
FUNCTION
A.B.C.
TOUCH
SUSTAIN
DUAL
LOWER
DSP
22
Reverb Level

Medeli M5 Specifications

General

Brand	Medeli
Model	M5
Category	Electronic Keyboard
Language	English