A standard pair of stereo headphones can be connected
to the PHONES jack for private practice or late-night
playing. The internal stereo speaker system is
automatically shut off when a pair of head phones is
plugged into this jack.
Note：
Do not listen with the headphones at high volume for long
periods of time. Doing so may cause hearing loss.
Plug an audio cord into the OUTPUT jack.
Then plug the other end of the cord into LINE IN or AUX.
IN of the amplifier.
Note:
To avoid damaging the speakers, please ensure that the
volume has been set to the minimum level before
connecting the power and other devices.
The instrument receives and transmits MIDI messages
via the USB connector.
Connections
7
Connecting a pair of Headphones
Connecting an Amplifier
Connecting a Computer
To Next Page
Loading...
