5. If you want to switch device into “WiFi”
mode go to”Settings/Mode” and select
“WiFi mode” and click “OK”.
“WiFi” mode conguration
Note! Before proceeding make sure that you
have switched device into “WiFi mode” as de-
scribed above.
1. Plug device to USB power supply, use
PC computer and scan for new WiFi net-
works, connect to “3G uFi_XXXX” net-
work (enter default password when
prompted “1234567890”). Now use your
web browser and enter following address
http://192.168.100.1
Enter default username “admin”
Enter default password ”admin”
To Next Page
Loading...