INSTRUCTIONAL MANUAL
between your choice of speed
measurements. Once you have
selected one, simply hit both
buttons to lock in your choice.
Next, the meter needs to know
your correct height. You can
increase height with the left
button, and decrease the
numbers with the right. Don’t
forget to “lock in” your choice by
hitting both buttons.
The final setting is club length.
This lets you change to almost
any club in your bag, however,
most people will be using their
driver. Put in your club length
using the right and left buttons
again. As an example, if you’re
using your driver, most men’s
drivers are around 45 inches, so
you would choose 45 here, or
the actual length of your driver.
A seven-iron is likely to be 37
inches long, so you would enter
37, or your actual seven-iron
length.
Once you have your basic
settings entered, you will only
need to change your settings if
you go to a different club.
FIGURE 3
5
To Next Page
Loading...