DE
EN
ES
FR
IT
NL
9
4.2. Installation location
• Keep your monitor and all connected devices away from
moisture and avoid dust, heat, direct sunlight and naked
flames (such as candles, for instance). Non-compliance with
these instructions can lead to faults or damage to the moni-
tor.
• This device is not suitable for use at workstations in line with
the regulation for computer workstations S 2.
• Do not use the device outdoors as it could be damaged by
weather such as rain, snow etc.
• Avoid exposing the device to water droplets or spray and do
not place any liquid-filled containers (vases or similar) on or
next to the device or the power pack. Liquids penetrating the
device may impair the electrical safety of the product.
• The slots and openings on the monitor are for ventilation pur-
poses. Do not cover these openings (risk of overheating, fire
hazard)!
• Position the cables so that no one can tread on them or trip
over them.
• Make sure that there is enough clearance between the de-
vice and any surrounding furniture or walls. Ensure a mini-
mum clearance of 10 cm around the device for sufficient ven-
tilation.
• Place and operate all the components on a stable, level and
vibration-free surface in order to prevent the monitor from
falling.
To Next Page
Loading...
Need help?
General
