40
4.2. Installation location
• The device should only be placed on level, stable surfaces.
• Protect the device from knocks and vibrations.
The device is not designed for use in rooms with high humidity
levels (e.g. bathrooms). Make sure that you do the following:
• To ensure adequate ventilation, do not cover the vents.
Ventilation must not be impeded by covering up the vents
with objects like newspapers, tablecloths, curtains etc.
• Allow at least 10 cm clearance at the sides and top of the de-
vice if it is placed on a shelf or a similar enclosed space.
• Do not expose the device to extreme temperatures.
• Do not expose the device to direct sources of heat (e.g. heat-
ers, sunlight).
• Do not place naked flames (for example, lit candles) near or
on the device.
• Avoid contact with moisture, water and splashes. Do not
place any objects filled with liquid, for example vases, on or
next to the device.
• Do not place the device close to magnetic fields (for example,
televisions or other speakers).
To Next Page
Loading...
