Medivators DSD-201 - Completing the Disinfection Process

ME
"REPROCESSING SYSTEMS
U)
Air Phase
The air phase is simply a programmed time during which air is purged through the scope
channels.
Note: Please refer to the Disinfection Cycle Chart for user program-
mable time settings, default state times, and time limitations.
Note: Every drain transaction is followed by an air purge where air is
flushed through the scope channels and internal fluid lines. The
Air LED on the control panel blinks during air purge.
the present phase. The Flush LED indicates that one of the
4 Note: During each phase of the cycle, an LED illuminates to indicate
wash phase segments is running.
122
MM03-0047
Revision
D