Need help?Do you have a question about the Medivators SCOPE BUDDY and is the answer not in the manual?
Guidance on how to use the manual for Scope Buddy.
Overview of the Scope Buddy Endoscope Flushing Aid.
Technical specifications of the Scope Buddy device.
Defines the purpose and intended application of the Scope Buddy.
Explains the meaning of safety icons and alerts.
Guidelines for safe operation by trained personnel.
Measures to ensure patient safety during endoscope use.
Precautions related to endoscope handling and compatibility.
Details the electrical certifications and safety standards met.
Procedures for initial cleaning of endoscopes before use.
Information on cleaning and disinfection protocols for endoscopes.
Instructions for setting up and installing the Scope Buddy device.
Lists and illustrates the parts included with the Scope Buddy.
Explains the functions of the Scope Buddy's control panel and buttons.
Details the various tubing and adapters for connecting to endoscopes.
Setting and using programmable flush cycle times.
Procedure for flushing elevator wire channels and forward water jets on specific endoscopes.
Step-by-step guide for flushing using the Medivators DSD hook-up.
Guide for flushing using the endoscope manufacturer's all-channel irrigator.
Steps to set up and prime for the flow validation test.
Detailed steps for conducting the flow validation test and interpreting results.
The actual steps for performing the decontamination process.
Information on maintaining the Scope Buddy device.
Lists common problems and their corrective actions.
Definitions of key terms used in the manual.
Details the warranty coverage and period for the Scope Buddy.
Outlines the exclusive remedies available under the warranty.
States the limitations and disclaimers of the warranty.
General| Category | Medical Equipment |
|---|---|
| Product | SCOPE BUDDY |
| Power Supply | 100-240V AC, 50/60Hz |
| Compatibility | Compatible with most standard endoscopes |
| Manufacturer | Medivators |
To Next Page
