SCOPE BUDDY USER/SERVICE MANUAL
12
Tubing Connections
The device is designed to function with a wide variety of manufacturer’s endoscopes of various
configurations. The device is supplied with different types of tubing connections which allow connection to
most endoscopes.
The DSD Extension Line allows connection to a Medivators DSD hook-up which attaches to the endoscope.
Refer to the DSD Hook-up Application Guide to identify the correct hook-up to use for the endoscope being
flushed and the hook-ups’ Directions for Use Instructions for correct connection.
The Universal Cleaning Adapter Extension Line and multi-way adapters allow connection to the Universal
Cleaning Adapter provided with the endoscope. Refer to the endoscope manufacturer’s Instructions for Use
to ensure the correct Cleaning Adapter is being used and that it is correctly connected.
The Elevator Wire Channel Hook-up allows flushing of the elevator wire channel of a Fujinon
Duodenoscope. The Elevator Wire Channel Hook-up is also used to flush the forward water jet of a Fujinon
endoscope.
Note: The Fujinon forward water jet adapter is always used in conjunction with the Elevator
Wire Channel Hook-up.
Note: When using a Pentax or Fujinon water jet adapter, always verify it does NOT contain a
check valve. Only non-check valve forward water jet adapters can be used with Scope Buddy
to achieve the correct flushing volume over the stated Rinse Matrix times.
Note: The universal cleaning adapter may be referred to as an All-Channel
Irrigator by some endoscope manufacturers.
Reference the Medivators Hook-up Application Guide which can be downloaded at
www.minntech.com/medivators
to identify the appropriate DSD hook-up for the manufacturer’s endoscope
being cleaned.
The supplied tubing segments which facilitate endoscope connection are:
• Fluid Intake Line – Tubing set that allows fluid to be drawn up from the sink into the SCOPE BUDDY.
•
DSD Extension Line
– Tubing set that allows fluid to be delivered from the machine to the DSD Hook-up.
• Universal Cleaning Adapter Extension Line – Tubing set that allows fluid to be delivered from the
machine to the Universal Cleaning Adapter supplied with the manufacturer’s flexible endoscope.
• UCA 2-way Adapter – Tubing adapter which connects to the Universal Cleaning Adapter Extension
Line and allows connection to an endoscope’s Universal Cleaning Adapter with 2 connection ports.
• UCA 3-way Adapter – Tubing adapter which connects to the Universal Cleaning Adapter Extension
Line and allows connection to an endoscope’s Universal Cleaning Adapter with 3 connection ports.
• UCA 4-way Adapter – Tubing adapter which connects to the Universal Cleaning Adapter Extension
Line and allows connection to an endoscope’s Universal Cleaning Adapter with 4 connection ports.
• Elevator Wire Channel Hookup – Tubing set that allows fluid to be delivered from the machine to the
elevator wire channel, or to the forward water jet of a Fujinon endoscope.
• Flow Verification Tube – Tubing segment used during the Daily Quality Assurance Test to ensure
SCOPE BUDDY is delivering the proper amount of fluid.
Note: A complete set of tubing connections is available by contacting Medivators Customer
Support. The reorder part number is 78399-669, and the tubings are only available as a
complete set.
To Next Page
Loading...
