Medivators DSD-201 - Reprocessor Leveling Procedure

^ |
e >
GO MEDIVA SYSTEMS
Overriding the Disinfectant Warning
The Maximum Disinfectant Cycle Count is preset in the Diagnostics menu. After the disinfectant
reaches 10 cycles before the maximum number of cycles, the warning indicator illuminates and
the “Dis Warning” message displays on the LCD screen. The warning indicator remains illumi-
nated until either the disinfectant is changed or the disinfectant warning override (Setup 7) is ini-
tiated.
Use the procedure below to override the Disinfectant Warning.
Press the STATION SELECT button to choose station A or station B.
Press the SETUP button on the reprocessor control panel.
Enter 7 on the keypad, then press the ENTER button.
The message “Dis Warn Ack” is displayed on the screen.
の
か
SNP
Set the “Dis Warn Ack" to zero.
- This overrides the disinfectant warning for another 10 cycles.
- The “Dis Expired” message is displayed when the maximum cycle count is
reached.
Warning! Never use disinfectant beyond the manufacturer’s
® recommended reuse life, even if the MRC level is
><
acceptable.
® Warning! Never use disinfectant that is below acceptable MRC
>< level, even if the reuse date is unexpired.
126
MM03-0047
Revision
D