Medivators DSD-201 - Air Filter Replacement Procedure

= ğ
‘77 REPROCESSING SYSTEMS
w INTERNAL WATER FILTER-REMOVE
The disinfector must be in idle state to perform this procedure.
1. Close the incoming water supply valve to the disinfector.
2. Drain excess water from the filter housing.
* Place a container under the water filter inlet tube.
* Disconnect the water filter inlet quick-connect from incoming water supply line.
* Connect the accessory hose to the water filter inlet tube.
* Open the filter bleeder valve and drain the water from the filter canister.
3. Remove the water filter cartridge.
Warning! Always wear gloves when handling the filter cartridge.
a
・ Loosen the internal filter and remove the water filter housing.
* Rotate the filter counterclockwise to unlock the filter cartridge.
+ Remove the filter and discard in accordance with institution guidelines.
140
MM03-0047
Revision
D