Medivators DSD-201 - End of Cycle and Lid Lock Issues

w DRAINING CONDENSATION FROM AIR CHAMBER
160
Condensation will accumulate inside the air chamber. It is recommended that the air
chamber be drained periodically. Perform the following procedure when both stations are
idle.
1. Locate the air chamber on the back panel inside the cabinet between the reservoir and
Side A main module.
2. Pull the ring attached to the relief valve located at the bottom of the air chamber.
3. Ensure that the purged air is free of condensation.
4. Release the ring.
MM03-0047 Revision D