Medivators DSD-201 - Diagnostic Message Explanations

== MEDIVATORS
Ca REPROCESSING SYSTEMS
Diagnostic Mess
Adjust Alarm....................
Air Sen Enable:................
Ale. Sen Enable................
Auto Dis. Option
Bas. Temp Enable
Basin Sen Enable: ............
Basin Temp. Cal...............
Contrast adj
Count down from
CVR Sen Enable:.............
Cycle Count
Det.SenEnable...............
Diagnostics.......................
FLO Sen Enable:..............
Heat Option
Input Code: ......................
Input S/N major
Input S/N minor
ages
Diagnostic 27:
Diagnostic 40:
Diagnostic 47:
sensor.
Diagnostic 88:
fect
option.
Diagnostic 49:
ture sensor.
Diagnostic 42:
sor.
Diagnostic 31:
Diagnostic 26:
LCD contrast.
Diagnostic 24:
Diagnostic 41:
sensor.
Diagnostic 91:
played.
Diagnostic 48:
sensor.
prompts the user to adjust the alarm volume.
prompts the user to enable / disable the air flow sensor.
prompts the user to enable / disabled the alcohol level
prompts the user to enable / disable the waterline disin-
prompts the user to enable / disable the basin tempera-
prompts the user to enable / disable the basin level sen-
indicates that the DSD is in basin calibration mode.
prompts the user to press the enter button to adjust the
indicates that the DSD is performing a counter test.
prompts the user to enable / disable the cover (lid) open
indicates that the DSD total cycle counts are being dis-
prompts the user to enable / disable the detergent level
Indicates that the DSD is in diagnostic mode.
Diagnostic 40:
sor.
Diagnostic 88:
option.
prompts the user to enable / disable the fluid flow sen-
prompts the user to enable / disable the heated reservoir
Prompts the user to enter the diagnostic entry password.
Diagnostic 82: prompts the user to enter the most significant two digits
of the serial number.
Diagnostic 82: prompts the user to enter the least significant two digits
of the serial number.
MM03-0047 Revision D