Medivators DSD-201 - Page 190

== MEDIVATORS
GO REPROCESSING SYSTEMS
Sheath Fail ...................... Indicates that the shect test failed.
Sheath Test....................... Notes when the sheath test portion of a cycle occurred.
Shth Sen Err..................... Indicates that the sheet tester measured pressure at the start of a cycle.
Start... Indicates when a cycle was started.
Sth Disabled..................... Indicates that the sheath (leak) tester was disabled.
StOD Indicates when a cycle was manually stopped.
Tempx.................... Indicates the basin temperature at the beginning and end of the disin-
fect phase.
A-8
MM03-0047
Revision
D