Need help?Do you have a question about the Medline Hemo-Force MDS600INT and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Model | MDS600INT |
| Name | Medline Hemo-Force |
| Measurement Method | Oscillometric |
| Memory | 60 readings |
| Power Source | 4 AA batteries or AC adapter |
| Display | LCD |
| Type | Digital Blood Pressure Monitor |
| Weight | Approx. 300g (without batteries) |
| Pressure Range | 0-300 mmHg |
| Pulse Rate Range | 40-200 beats per minute |
Details the system's application, patient use, and therapy parameters for DVT prevention.
Manufacturer's declaration regarding RF emissions and their compliance with standards.
Details model names, sizes, and circumference ranges for various sleeves and tubing.
A checklist for qualitative assessment of the device's components and indicators.
A checklist for quantitative assessment, including pressure and leakage tests.
Step-by-step guide for performing the initial qualitative and quantitative assessments.
Instructions for opening the control unit for internal inspection and checks.
Details routine operational checks for the control unit and power cord.
Outlines periodic preventative maintenance tasks, including filter replacement.
Step-by-step guide for identifying, removing, and replacing the air filter.
Steps to verify the minimum pressure setting for calf/thigh sleeves.
Steps to verify the maximum pressure setting for foot sleeves.
Guide on how to adjust pressure regulators using a screwdriver.
To Next Page