What to do if my Medline HEMO-FORCE MDS600INT2 shows a system failure?
If your Medline Medical Equipment displays a 'System Failure', check the air hose connection first. If the pressure remains greater than the set pressure after two inflations, or if there's an electrical malfunction, turn the pump off and restart it. If the problem continues, seek assistance from a qualified service professional.
How to troubleshoot low pressure in Medline Medical Equipment?
If you're experiencing 'Low Pressure' with your Medline Medical Equipment, start by checking the sleeve application to ensure it fits properly. Also, inspect the sleeves and air hose set for any leaks, and replace them if you find any faults. As an additional step, turn the pump off and then restart it. If the issue persists, it's recommended to consult a service professional.
What to do if Medline Medical Equipment displays a sleeve error?
If your Medline Medical Equipment shows a 'Sleeve Error', first, ensure that the sleeves are attached to the pump and restart the device. Also, make sure the sleeves are fully deflated before restarting. Check the connectors for any blockages and restart the equipment. If the problem persists, consult a professional for service.
General| Category | Blood Pressure Monitor |
|---|---|
| Model | MDS600INT2 |
| Product Type | Upper Arm Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Display | LCD |
| Weight Classification Indicator | Yes |
| Irregular Heartbeat Detector | Yes |
| Automatic Shut-off | Yes |
| Power Source | 4 AA batteries |
Provides a description of the Hemo-Force® system and its features.
Explains the purpose of the system and the target user demographic.
Lists essential precautions for using the pump and sleeve safely.
Instructions on unpacking the device and connecting to a power source.
Guidelines for storing the system based on temperature and humidity.
Explains the various icons displayed on the control panel.
Describes the functions of power, timer, mute, and battery indicator buttons.
Visual and descriptive information about the air hoses.
Visual and descriptive information about the compression sleeves.
Step-by-step guide for connecting air hoses to the control unit and sleeves.
Lists the items included in the product package.
Guidance on plugging in, positioning, and applying the sleeves.
Instructions for applying foot sleeves and connecting air hoses.
Steps for turning on the pump, initialization, and checking settings.
How to use the timer, reset it, turn off the pump, and disconnect.
Advice on managing tubing and connectors for optimal performance.
Guidelines on sleeve application, system use, and responding to alarms.
Information on the optional battery backup and its capacity indicator.
Explains the status indicated by indicator lights and audible alarms.
Steps to resolve low pressure alarms.
Steps to resolve high pressure alarms.
Steps to resolve garment error alarms.
Steps to resolve system failure alarms.
Lists conditions where the system should not be used.
Instructions for cleaning the pump and its components.
Details on product name, size, weight, and pressure ranges.
Information on input rating, fuse, classification, and operating conditions.
Lists available sleeve models and their sizes.
Lists available pump and tubing models.
Details the available battery model for the pump.
Guidance on separation distances from RF sources to prevent interference.
Manufacturer's declaration on RF and harmonic emissions.
Manufacturer's declaration on immunity to electrical transients, surge, and power fields.
Manufacturer's declaration on immunity to conducted and radiated RF.
Explains common symbols used on the device and in the manual.
Explains symbols for lot number and controller serial number.
Details the warranty period, coverage, and exclusions.
To Next Page