Medline MDS3001 User Manual

-16-
from the monitor socket.
Do not plug or unplug the power cord into the electrical outlet with wet hands.
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
If the AC adapter isn’t working, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use any other type of AC adapter as it may harm the monitor.
Do not to position the monitor so that it is difficult to operate the
disconnection device.
2. CLOCK AND DATE ADJUSTMENT
a. Once you install the battery or turn off the monitor, it will enter
Clock Mode, and LCD will display time and date. See picture 2.
b. While the monitor is in Clock Mode, press both the “START” and
“MEM” button down, then release the buttons. The month will blink
at first. Press the button “START” repeatedly, the day, hour and minute
will blink in turn. While the number is blinking, press the button “MEM” to increase
the number. Keep on pressing the button “MEM” to increase the number fast.
c. You can turn off the monitor by pressing “START” button when the minute is blinking,
Picture 2

Medline MDS3001 Specifications

General

Brand	Medline
Model	MDS3001
Category	Blood Pressure Monitor
Language	English