Medline MDS3001U - User Manual

Questions and Answers

I
ibarrettJul 25, 2025
Why does my Medline MDS3001U show an abnormal result?
- C
  Carla BarkerJul 25, 2025
  An abnormal result on your Medline Blood Pressure Monitor could be due to several reasons. It may be that the cuff was not positioned correctly or wasn't properly tightened; in this case, apply the cuff correctly and try again. Your body posture might have been incorrect during the test; review the instructions regarding body posture during measurement and re-test. Movement, speaking, or emotional state (anger, excitement, or nervousness) during testing can also cause this; re-test when calm, without speaking or moving. Finally, an irregular heartbeat (arrhythmia) may also be the cause; note that this device is not appropriate for people with serious arrhythmia.
L
Lindsay PopeJul 30, 2025
How to fix a Medline Blood Pressure Monitor when the LCD shows a low battery symbol?
- C
  Christopher DunnJul 30, 2025
  If your Medline Blood Pressure Monitor displays a low battery symbol, it means the batteries are low. You should change the batteries.
Y
ydunnAug 5, 2025
What to do if my Medline Blood Pressure Monitor doesn't respond when I press a button?
- A
  Alexandra GutierrezAug 5, 2025
  If your Medline Blood Pressure Monitor doesn't respond when you press a button or load the battery, it could be due to incorrect operation or strong electromagnetic interference. To resolve this, take out the batteries for five minutes, and then reinstall all batteries.
A
Alexandra BrownAug 10, 2025
What does 'Er 3' mean on my Medline Blood Pressure Monitor?
- C
  Charles AndersonAug 10, 2025
  If your Medline Blood Pressure Monitor LCD shows 'Er 3', it indicates that the pneumatic system is blocked or the cuff is too tight during inflation. To fix this, apply the cuff correctly and try again.
J
Justin WoodsAug 14, 2025
What does error code 'Er 0' mean on a Medline MDS3001U Blood Pressure Monitor?
- S
  suzannemcfarlandAug 15, 2025
  If the LCD on your Medline Blood Pressure Monitor shows 'Er 0', it indicates that the pressure system is unstable before measurement. To resolve this, remain still and try again.
M
Melissa BarnesAug 19, 2025
What to do if Medline Blood Pressure Monitor displays 'Er 5'?
- D
  Devin CruzSep 12, 2025
  If your Medline Blood Pressure Monitor displays 'Er 5', it means the cuff pressure is above 300mmHg. Wait five minutes and measure again. If the monitor is still abnormal, please contact the local distributor or the factory.