What to do if Medline MDS4003 displays error message E 2?
If your Medline Blood Pressure Monitor displays error message E2, it indicates that the cuff is not secure. Refasten the cuff and then measure again.
How to fix inaccurate reading on Medline MDS4003 Blood Pressure Monitor?
To address inaccurate readings on your Medline Blood Pressure Monitor, avoid eating, smoking, and drinking (especially alcoholic beverages) before taking a measurement. Also, check that the cuff fits snugly.
What to do if my Medline Blood Pressure Monitor does not turn on?
If your Medline Blood Pressure Monitor isn't turning on, try the following: * Make sure the batteries are properly inserted and the battery cover is securely in place. * Verify that the battery polarities (+ and – symbols) are correctly aligned. * Consider replacing the old batteries with new ones.
What to do if Medline MDS4003 Blood Pressure Monitor shows no power?
If your Medline Blood Pressure Monitor has no power, it could be due to exhausted batteries. Replace them with new ones. Another possibility is that the batteries are inserted incorrectly. Ensure you insert them correctly, following the device's instructions.
Why does my Medline Blood Pressure Monitor say low?
If your Medline Blood Pressure Monitor displays a 'Low' message, it's likely because the batteries are low. Replace them with new batteries to resolve this issue.
What to do if Medline Blood Pressure Monitor displays error message E6?
If your Medline Blood Pressure Monitor shows error message E6, it indicates that the voltage of the batteries is too low during inflation. Try measuring again. If the E6 error reappears, replace the batteries with new ones.
What to do if Medline MDS4003 displays error message E 1?
If your Medline Blood Pressure Monitor shows error message E1, it means the inflation is too low. Refasten the cuff and then measure again.
What to do if Medline MDS4003 displays error message E 3?
If your Medline Blood Pressure Monitor displays error message E3, it means the device can’t inflate the air during the measurement process. Try refastening the cuff and then measure again.
What to do if Medline Blood Pressure Monitor displays error message E 4?
If your Medline Blood Pressure Monitor displays error message E4, it indicates that the cuff is too tight. Refasten the cuff and then measure again.
What to do if Medline MDS4003 Blood Pressure Monitor displays error message E 5?
If your Medline Blood Pressure Monitor displays error message E5, it indicates there is excess pressure in the cuff. Relax for a moment and then measure again.
General| Brand | Medline |
|---|---|
| Model | MDS4003 |
| Category | Blood Pressure Monitor |
| Language | English |
Specifies intended use for adults in home use, measuring blood pressure and heartbeat.
Explains the Oscillometric Measuring Method used by the device.
Lists the items included in the product package, such as the monitor, batteries, and manuals.
Details blood pressure categories based on WHO and ISH guidelines.
Explains the function and symbol for detecting irregular heartbeats.
Details compliance with FCC rules regarding interference.
To Next Page
