11
SETTING ALARM CLOCK
1. Make sure the machine is powered OFF, then hold the SET button for 5 seconds until digits on the screen
start flashing.
2. Press the SET button to advance the screen from the date, time, and talking feature.
3. The screen will have a small bell located in the upper left hand corner of the screen.
4. Press the MEM (memory) button to change the alarm clock from OFF to ON.
5. Once ON, press the SET button to switch to the time located above "ON" on the lcd screen
6. Press the MEM (memory) button to change the hour digit.
7. Once the hour is set, press the SET button to move to the minute digits.
8. Press the MEM (memory) button to change the digits.
9. Once the alarm is set and turned on, a small bell icon will appear in the top left hand corner of the screen
when the unit is powered off.
To Next Page
Loading...
Need help?
General
