Need help?Do you have a question about the Medrad Mark 7 Arterion and is the answer not in the manual?
General| Model | Mark 7 Arterion |
|---|---|
| Pressure Limit | 1200 psi |
| User Interface | Touchscreen |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Type | Injection System |
| Manufacturer | Medrad/Bayer |
| Application | Angiography |
| Flow Rate | 0.1 to 45 mL/s |
| Volume Capacity | 200 mL |
| Syringe Size | 150 mL |
| Connectivity | Ethernet |
| Weight | 20 kg |
| Design | Cart-based |
Crucial safety warnings for proper system use and patient care.
Specifies the system's purpose for injecting contrast medium for angiographic studies.
Details critical warnings about air embolism, patient injury, contamination, and electrical hazards.
Explains system features preventing over and under injections and fault condition responses.
Step-by-step guide for safely powering on the injection system.
Instructions for immediate system shutdown in emergency situations.
How to configure injection parameters like flow rate, volume, and pressure on the Home tab.
Steps for creating, recalling, editing, and deleting injection protocols.
Instructions for correctly installing the syringe into the system.
Procedures for filling and purging air from the syringe.
Steps for installing and purging the high-pressure tubing.
The process for confirming air has been purged before arming the system.
Guides on arming the injector in single and multi-mode for injections.
Detailed steps for executing injections using various modes and interfaces.
Recommended daily cleaning and inspection procedures for system components.
Step-by-step guide for assembling and installing the pedestal mount.
Procedures for installing the power unit and its connections.
To Next Page
