EN
72
The snowblower does
not throw snow.
Ejector chute blocked.
Switch o the engine immediately,
remove the ignition key, and wait until
all moving parts have stopped. Clear
the ejector chute with the clearing tool
or a stick.
One or more shear pins have sheared o. Replace the shear pins.
Foreign object blocking the auger.
Switch o the engine immediately and
remove the ignition key. Remove the
foreign object from the auger.
Auger lever wire incorrectly adjusted. Adjust the auger lever wire.
Rotor drive belt loose or damaged. Replace the belt.
To Previous Page
Loading...