30
2023_001
2.3 Work area safety
Warning! If you do not obey these instructions, there
is a risk of death or injury.
● Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
● Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
● Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2.4 Electrical safety
Warning! If you do not obey these instructions, there
is a risk of death or injury.
● Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
● Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
● Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
2.5 Personal safety
Warning! If you do not obey these instructions, there
is a risk of death or injury.
● Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
● Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal
injuries.
● Prevent unintentional starting. Ensure the switch is in the
o-position before connecting to power source and/or
battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
1.4 Product overview
Figure 1
1. Speed regulator
2. Trigger lockout
3. Trigger
4. Rear handle
5. Battery holder
6. Front handle
7. Front handle locking screw
8. Length adjustment locking nut
9. Water inlet
10. Motor unit
11. Splash guard
12. Soft roller brush
13. Support wheel
14. Metal wheel brush
15. Plastic wheel brush
2 Safety
2.1 Safety definitions
Warning! If you do not obey these instructions, there
is a risk of death or injury.
Caution! If you do not obey these instructions, there
is a risk of damage to the product, other materials or the
adjacent area.
Note! Information that is necessary in a given situation.
2.2 General safety instructions
Warning! Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
To Next Page
Loading...